Manufacturing of polypropylene fiber
The equipment is produced on our own patented technology, using advanced domestic and foreign developments. The production experience of our company is more than 10 years. Our engineering staff constantly improves and develops manufacturing technologies. The equipment offered for delivery is produced under the trade mark ARMASTEK.
Requirements for the production site:
– Recommended length of the area: from 15 meters;
– Recommended ceiling height of the area: from 2.8 meters
– Height difference on the technological platform: not more than 50 mm
– The air temperature in the room is not lower than 15 ° С
Сircuit design of the line
The equipment consists of the following units and assemblies:
1. Screw extruder
2. Stabilization Bath
3. Fist pulling unit
4. Thermal tunnel
5. Air cooling system
6. Second pulling unit
7. Profiling unit
8. Cutting unit
9. Scales
10. Control panel
Specifications
| № | Parameter name | Parameter value |
| 1 |
| Length, 10 meters Width, 3 meters Height, 2 meters |
| 2 | Average capacity | 20 kg / h |
| 3 | The range of possible for production diameters | from 0.4 mm to 1.5 mm |
| 4 | Fiber length | from 20 mm to 70 mm |
| 5 | Consumption of running water per day | 3000 liters |
| 6 | Power consumption | 380V and average value 10 kW / h |
| 7 | Line weight | 950 kg |
ALWAYS IN TOUCH
Our managers will help to make the right choice and answer your questions
