Rus
 
 
Technical support:
+7 (342) 259-259-7
Project group:
+7 (342) 234-234-9

Composite Mesh Production

Оборудование

Components of processing line:

1. Rack for roving

2. The impregnating bath

3. The moulding unit –winder

4. Cross-bar feed with a re-winding device

5. Remote control

6. The curing chamber

7. Cooling module

8. The pulling mechanism

9. Shear station for cutting

10. Roll winder

11. Table of ready products in the form of sheets

The offered equipment enables to produce mesh with:

  • 500 to 2000 mm width
  • 50x50 / 100x100 / 150*150 / 200*200 mm cell
  • 1.8 to 8.0 mm bar diameter.

Raw materials for production of mesh on the lines of "Armastek":

  • fiber (glass, basalt roving)
  • medium
  • compound based on epoxy-diane or polyester resins

Form of issue:

rulon

rolls

karta

sheets

Specifications

No. Parameter name. Parameter value
1 Electricity consumption at start-up within 20 minutes 30 kW / h
2 Electricity consumption at constant line operation 5-6 kW / h
3 Type of mains current Alternate three-phase
4 Voltage 380 V
5 Number of motors on line 5
6 The allowed amount of rejects 1-2%
7 Comfort operating temperature +20+25C°
8 Humidity <80%
9 Consumption of cold water 0.3 m³ / h per line
10 Closed cycle Cooler
11 Minimum rod section of the reinforcing mesh 1,8 mm
12 Maximum rod section of the reinforcing mesh 8 mm
13 Capacity 800-1000 square meters / shift (12 hours)

Dimensional Specifications

No. Parameter name Parameter value
1 Overall dimensions (Length / Width / Height), m 18,0 * 2,5 * 1,5
2 Dimensions, including the roll-facing unit, m 25,0 * 2,5 * 1,5
3 Dimensions, including a table for 12 meter sheets, m 35,0*2,5* 1,5
4 Distance between lines, m 2
5 Area for storage of raw materials 100 m²
6 Area for cutting 200 m²
7 Area of storage warehouse of products 300 m²
8 Area of laboratory, preparation and mixing of raw materials 30 m²

"Armastek" equipment means:

  • a developed and tested technology
  • high-quality product
  • world experience
  • quality equipment
  • product durability

The complex offer ("plug-and-produce") includes:

  • Production lines
  • A complete set of production documentation necessary for the organization and operation of production
  • Training of your working staff of "Armastek" technology
  • Starting-up and adjustment including the optimization of the technological process and the release of the first meters of mesh by our specialists in the installation of the lines
  • Assistance in passing product tests, obtaining a certificate for products with audit of production.

Оборудование


ALWAYS IN TOUCH

Our managers will help to make the right choice and answer your questions

+7 (342) 200-85-99